How to disassemble the metal button switch?
How to remove the metal button switch? It must be carried out in the correct order. The following small editor will tell you about the disassembly of the metal button switch.
First, remove the screws or snaps that fix the front panel: remove the panels on both sides of the chassis. Look at the direction of the front panel, we will see the snaps or screws that fix the front panel. If it is fixed by screws, the objects can be unscrewed with a long handle cross screwdriver. If it is a buckle, please use a flat screwdriver and other tools to open it. Remove the front panel: after the above disassembly, if it is fixed by screws, the front panel can be removed directly after the screws are removed. Lay the chassis flat and upside down. If the buckle is fixed, after the buckle is pried off, press the chassis body with your hand, stretch it into the hole under the front panel, and lift it forcibly. Observe the front panel: screws or clips are also used to fix the switch buttons on the front panel. Open with a screwdriver as appropriate.
After reading the above content, I believe you all know the disassembly work of metal button switch.
